Header OPTI SCREEN Wilton
OPTI SCREENTM

How do environmental factors such as (side) wind, pollution, and warm air recirculation affect the operational output of your air-cooled cooler / condenser?

Why OPTI SCREENTM Technology?

The innovative OPTI SCREEN™ technology offers solutions in two situations:

Met zonder zijwind Wilton

1. Increasing crosswind

With increasing crosswind, the airflow through the air-cooled cooler decreases due to a change in static pressure in the fan. 

This has two consequences:

  1. capacity reduction → Less cooling air flows through the cooler bundles.
  2. shortened lifespan and reduced reliability → A large dynamic load is created on the fan blades, resulting in imbalance and vibrations. These effects lead to a much greater degradation of the fan system.
Warmeluchtrecirculatie Wilton

2. Warm air recirculation

With hot air recirculation (warmeluchtrecirculatie or HAR), the warm air blown out at the top of a cooler bank mixes with the cold ambient air that is drawn in at the bottom of the cooler.

Consequence:

The temperature at the cooler inlet increases, resulting in a decrease in cooling capacity.

The facts at a glance:

80% of vibrations and fan trips

Are caused by crosswind

Wind speeds > 3 m/s

Provides a significantly lower cooling airflow

Inlet air temperature ↑ of 2°C

Often results in 20% less cooling capacity

Optimizing with OPTI SCREEN™ TECHNOLOGY

Expansion is not necessary with OPTI SCREEN™. This new technology ensures lower energy consumption and unchanged maintenance costs when applied in the existing situation

At the same time, there are fewer noise sources and therefore a lower noise emission. OPTI SCREENTM also directly contributes to a reduction in CO2 emissions.

Opti Screen 1 Wilton
Opti Screen 2 Wilton

The unique design features of OPTI SCREEN™

  • strong and lightweight
  • protected against UV radiation
  • suitable for extreme conditions; up to a wind speed of 193 km/h and temperatures from -45 °C to +70 °C
  • made from flame-retardant, antistatic, and rot-resistant material
  • custom solution, turn-key
  • installation possible while air-cooled equipment is operational!
CTA balk 7 Wilton CTA balk 7 klein Wilton CTA balk 7 klein Wilton CTA balk 7 klein Wilton
Also want to counteract the negative effects of (side) wind and warm air recirculation?

Learn more about OPTI SCREEN™

This website uses cookies

We use cookies to improve your experience. Read more

Close